Advanced features include:

• Port Injection Control
• Flex Fuel Capabilities
• Map Switching based on Vehicle mode
• Additional inputs for items like coolant pressure, EGT or other safety sensors
• All mounting hardware for factory like fitment included
• All essential Porsche Original Equipment (OE) functions are maintained

Advanced features include:

• Port Injection Control
• Flex Fuel Capabilities
• Map Switching based on Vehicle mode
• Additional inputs for items like coolant pressure, EGT or other safety sensors
• All mounting hardware for factory like fitment included
• All essential Porsche Original Equipment (OE) functions are maintained

The Urus/RS Q8 Intercoolers have been meticulously designed and engineered to fit exactly like the OEM units they replace. Utilizing all factory mounting points, the installation is straightforward with a “drop-in fit” design. No cutting or modifications are required, and there is no need for aftermarket shrouds or hoses. All mating OEM components can be reused and reinstalled.

Sold as a pair (Left & Right Intercoolers)
Eliminates Heat Soak and Lower Intake Air Temperatures (IAT) for Maximum Performance in High-Performance and Race Conditions
Formula-1 Performance Grade Cores by PWR (2-Row Cores features Rolled Tubes w/ Inner Fins)
CNC Machined Billet End Tanks
100% TIG Welded vs OEM Crimped Plastic End Tanks for Maximum Strength & Durability
Made in the USA at PWR North America
Integrated 1/8th NPT Port with plug on lower outlet tank for Water-Methanol Injection
OEM Style Inlet/Outlet Connections for Precise Fitment With All OEM Components
Finished in CSF’s Thermal Dispersion Ceramic Coating (CSF #8211)
Raw Finish with no coating for the “show” look or custom finishes available upon request (CSF #8211R)
True Plug-and-Play “Drop-in Fit” Installation Requires Absolutely No Modifications
R&D and Performance Testing by Pacific German & VF Engineering
1-Piece Welded Charge Pipe vs OEM Bolt-On Pipe w/ O-Ring (known failure point)

Performance Gains:
Stage 1 (Stock Tune) – Approx. +20 WHP / +18 WTQ*
Stage 2 (With High-Performance Tune) – Approx. +10 WHP / + 20 WTQ*
*Estimated Performance based on same engine platform Audi C8 RS6/RS7 CSF Intercoolers

Applications:
2019+ Lamborghini Urus
2020+ Audi RS Q8

American made Skid plates for Audi C7 A6/S6/A7/S7/RS7 Cars. The skid plates are Made of 5052  Aluminum. All necessary hardware is included along with complete instruction sheet. Four Rings Auto saw a need for a better solution to the stock plastic skid plate that break or get ripped off if your car is lowered or hit something. This skid plate helps protect against that.

Thickness 0.1155 

***These skid plates are in-stock and drop shipped from manufacturer***

American made Skid plates for Audi B8 and B8.5 Cars A4 A5 S4 S5 2009-2016. The skid plates are Made of 5052 4mm thick Aluminum. All necessary hardware is included along with complete instruction sheet. Four Rings Auto Service made a need for a better solution to the stock plastic skid plate that break or get ripped off if your car is lowered or hit something. This skid plate helps protect against that. 

The skid plates are Made of 5052 3/16 thick Aluminum. All necessary hardware is included along with complete instruction sheet. Four Rings Auto Service saw a need for a better solution to the stock plastic skid plate that break or get ripped off if your car is lowered or hit something. This skid plate helps protect against that.

CTS Turbo is proud to announce the release of the high-flow aluminum charge pipe for new generations of B58C engines in G-series BMW 3.0T engines and A90 Toyota Supra 3.0T

The CTS Charge Pipe Kit offers more air flow than a factory pipe, OE-like fitment and peace of mind at any boost level. Our charge pipe kit will also improve the reliability of your B58C engine over the plastic stock part.

You’ll notice an increase in throttle response and a decrease in turbo lag. It’s is a must for vehicles tuned to run higher than stock boost level.

Product Details:

• Precision CNC machined flanges for perfect fitment
• T6061 Mandrel-Bent Aluminum Pipe
• Robust Black Powdercoat Finish
• 4 ply Silicon Connectors
• Stainless Steel Clamps and Hardware
• 2 x 1/8″ NPT Water-Methanol Bungs with plugs
• Replaces BMW Part number 13718651066 (with 2 bolts on throttle body)

Fitment:

• Toyota A90-A91 MKV Supra B58 3.0L
• BMW G01 X3 xDrive40i B58 3.0L
• BMW G02 X4 xDrive40i B58 3.0L
• BMW G05 X5 xDrive40i B58 3.0L
• BMW G06 X6 xDrive40i B58 3.0L
• BMW G07 X7 xDrive40i B58 3.0L
• BMW G11 740i B58 3.0L
• BMW G11 740i xDrive B58 3.0L
• BMW G11 745e xDrive B58 3.0L
• BMW G42 M240i xDrive B58 3.0L
• BMW G20 M340i B58 3.0L
• BMW G20 M340i xDrive B58 3.0L
• BMW G22 M440i xDrive B58 3.0L
• BMW G29 Z4 sDrive M40i B58 3.0L

• Faster recovery of Intake Air Temperatures (IATs)
• ~30°F reduction of Intake Air Temperatures (IATs) compared to OEM
• Less pressure drop compared to OEM core
  • Puts less stress on the turbo system and allows more boost to be made at higher target power levels
• Ultra strong CNC Billet construction replaces weak plastic tanks with crimped-on gasket sealing core.
• High performance bar/plate intercooler core by PWR pressure tested to 120psi
  • OEM cooler is a tube/fin core which is prone to failing at pressures over ~27psi
• Top feed port injection w/ included fuel rail (w/ CNC machined block-off caps included for non-use)
• Integrated Nitrous/Methanol Injection Ports
  • Individual ports for each runner for maximum control
• Integrated vacuum and parameter pad to measure additional parameters
• Easy access to spin-off oil filter
• Integrated breather port for easy bleeding of air from the water side of the manifold
• Included KIYLEX Thermal Rejection Manifold Spacer
  • Made from KIYLEX® – A patented revolutionary high-performance final stage polymer
  • Acts as a thermal barrier that dissipates heat between the cylinder head and intake manifold
  • Proven to lower intake manifold temperatures by up to 15%
  • Lowers Intake Air Temps (IATs)
• All necessary brackets, hardware, and instructions to install
• Raw Billet Aluminum Finish (#8233)
• Thermal Black Heat Dispersion Powder-Coating Finish (#8233B)
• Available in custom colors from the leader in BMW cooling customization (#8233C)
• True Plug-and-Play “Drop-in Fit” Installation – Requires Absolutely No Modifications.
• OEM level of fit and finish
• Limited Lifetime Warranty
• Applications:
  • 2021+ BMW G80 M3 (incl. Competition) – 6MT & ZF8 Auto
  • 2021+ BMW G82/G83 M4 (incl. Competition) – 6MT & ZF8 Auto
  • 2020+ BMW F97 X3 M (incl. Competition)
  • 2020+ BMW F98 X4 M (incl. Competition)
• OEM Part Number:
  • BMW: 17-51-8-092-584
  • BMW: 17-51-8-053-321
• MSRP/MAP
  • #8233 – $6,599.00 USD

This kit is specifically designed to replace the Porsche 996.110.253.52 fuel filter. This is mounted in the upper LH rear engine bay of the 996 and 997.1 chassis for all 911 AWD models and GT2/GT3. The Radium kit installs in minutes. No cutting or drilling is required. A couple of tools is all that is required.

Because the Radium filter is less restrictive than the OEM Porsche filter, there is less stress put on the fuel pump. Lower pre filter pressures will permit less current draw and thus less fuel temperature. Furthermore, this phenomenon permits an increase in fuel flow. The filter can withstand alternate fuels such as methanol, ethanol, E85, etc. For more information, go HERE.

Included
-Billet Aluminum Fuel Filter (selectable element)
-Billet Aluminum Filter Fitting (Porsche specific) 
-Billet Aluminum Filter Adapter Fitting 
-Billet Aluminum SAE Fitting
-PTFE -6AN Fuel Hose 
-Stainless Steel Hardware

VEHICLE COMPATIBILITY

Audi R8 Gen1 Type42
Audi R8 Gen2 Type4S
Lamborghini Huracan LP580-2
Lamborghini Huracan LP610-4
Lamborghini Huracan LP640-4
Lamborghini Huracan EVO
Lamborghini Huracan STO
Lamborghini Huracan Tecnica
Lamborghini Gallardo LP550-2
Lamborghini Gallardo LP560-4
Lamborghini Gallardo LP570-4

Engine and trans skid plates including hardware fits Audi B9 and B9.5 Cars A4, S4, S5 coupe, RS5 2016-present. The skid plates are Made of 5052 1/8" thick aluminum. All necessary hardware is included. Four Rings Auto Service saw a need for a better solution to the stock plastic skid plate that break or get ripped off if your car is lowered or hit something. This skid plate helps protect against that.

Item will be drop shipped from manufacture 

SRM 2.7T Bi Pipes With Methanol Bungs(No drilling!). Available in wrinkle black mandrel bent aluminum Bi pipes.  Removal or trimming of the clutch fan is required for proper fitment.

(Previous design was 51mm new design is 54mm)