The X34 Evo Intake Adapter is a critical component for upgrading 2019+ 8V.5 RS3 and 8S TTRS intakes. This adapter allows aftermarket air intakes for earlier models to connect to the OEM diverter valve located on the throttle body elbow.

The 034Motorsport Billet Aluminum MQB Rear Subframe Mount Inserts for MkVII Volkswagen Golf R, 8V/8V.5 Audi A3/S3/RS3, & MkIII Audi TT/TTS/TTRS are designed to limit movement in the factory rear subframe mounts to maintain proper suspension geometry when cornering, and improve the responsiveness of the rear suspension and differential.

By filling small voids in the four factory mounts as well as limiting vertical movement, this insert set eliminates the associated slop to ensure that you experience a more refined, connected driving experience, especially when driving at the limit. These billet aluminum parts will not pack and wear over time, and offer a lasting performance improvement.

Please Note: The factory rear subframe bolts are torque-to-yield bolts, and we recommend replacing them when installing these inserts. A new set of four OEM bolts is available separately below.

AUDI OEM Fuel level sender for TTRS & RS3 2.5L 2017 & Newer

Fuel Level Sensor, Fuel Sender Unit, Sender

OEM part number: 8V0919673D

034Motorsport's Carbon Fiber Engine Cover Overlay for the 8V Audi RS3 & 8S Audi TTRS is designed to tastefully complement the factory engine bay with a beautiful carbon fiber weave that is perfectly matched to OEM Carbon and all 034Motorsport Carbon Fiber components, such as our X34 Evo Intake system.

Higher flowing fuel injectors for the 2.5TFSI

Need customized tune settings beyond what the Dyno Spectrum OTS maps provide?

Rolling anti-lag

Pops and bangs

Exhaust flap and sound tuning

Rev limiter changes

4 Bar map sensor implementation

DS1 port injection, meth injection, nitrous controller implementation 

THIS SERVICE DOES NOT INCREASE POWER OUTPUT.  For more involved custom calibrations to increase performance, you must speak directly with one of our representatives.  

5-axis CNC machined billet aluminum throttle inlet for the 8V RS3/TTRS 2.5TFSI engine

Are you ready for one of the best performing DAZA intakes on the market? The X34 Carbon Fiber Audi 8S TTRS and 8V.5 RS3 4” Closed-Top Upper Intake for the 2.5 TFSI EVO offers horsepower and torque gains throughout the powerband, with peak gains of up to 21 crank horsepower and 16 ft-lbs of torque on stock turbo tunes with 4” inlets.

034Motorsport engineers worked hard to develop a cold air intake solution for the TTRS and RS3 that yields horsepower and torque gains over the well-designed factory airbox, ultimately resulting in this beautifully-manufactured Carbon Fiber 4” Closed-Top Cold Air Upper Intake System.

The USP Motorsports High Flow RS3 & TTRS downpipe transcends expectations in quality, performance, and sound. This system has been through extensive testing and is finally ready for its release. With an astounding growl, this downpipe is sure to turn some heads as your RS3 or TTRS cruises or rips down the road. If that wasn't enough, you can also expect a gain of 25+ wheel horsepower. Our stainless steel, mandrel bent, high flow design provides the supersonic airflow, increasing throttle response and overall power increase. No exhaust restrictions mean no wasted potential. Starting from a 96mm (3.79") opening, this system transitions down to a 3" section, through a 5" High-Flow 200-cell catalytic converter and splits off into dual 2.5" straight sections that connect directly to your factory exhaust. This system has been tested on multiple 9 second, 700+ WHP RS3 and TTRS cars. It sounds incredible, optimal performance and as always backed by our lifetime warranty. 

034Motorsport's Motorsport StreetSport Mounts for Audi 8S TTRS and 8V.5 RS3 models are the new standard in ultra-high performance. These mounts are designed with extreme performance in mind, manufactured from billet aluminum and high-durometer rubber, making them virtually indestructible, while maintaining better ride characteristics than polyurethane alternatives. These mounts have a lifetime guarantee regardless of power level applied and type of application they are used for.

These heavy-duty mounts will result in a moderate increase in noise, vibration, and harshness (NVH) transfer into the cabin, as they are designed to drastically reduce engine movement compared to the factory parts, but will introduce less NVH than our TrackSport mounts due to the lower-durometer rubber used. Additional NVH is most noticeable at idle, but once the vehicle is moving, NVH is

APR is pleased to present the ultimate engine control unit (ECU) upgrade for the 2.5T EA855 EVO (Gen 2) engine!

APR’s ECU Upgrades are the best dollar-per-horsepower modification one can make to the 2.5T engine. The upgrades dramatically increase horsepower and torque, making for an exceptionally quicker and more exciting vehicle. This is made possible through APR’s optimization of the factory engine management system to take full advantage of the engine’s capabilities, without needing any end user adjustment. The software loads to the factory ECU through the OBD-II port, resulting in a clean and headache-free install. Optional features, such as APR's EMCS Program Switching and APR Mobile are available. Furthermore, for those looking for tuning with a limited powertrain warranty, APR Plus has you covered!

Are you ready for the best performing DAZA intake on the market? The X34 Carbon Fiber Audi 8S TTRS and 8V.5 RS3 4” Open-Top Intake Bundle for the 2.5 TFSI EVO is a combination of our X34 Carbon Fiber Open-Top Cold Air Intake and the X34 Carbon Fiber Fresh Air Duct and Lower Airbox packaged together.

This intake offers horsepower and torque gains throughout the powerband, with peak gains of up to 33 crank horsepower and 36 ft-lbs of torque on stock turbo tunes with 4” inlets.

034Motorsport engineers worked intelligently to develop a complete cold air intake solution for the TTRS and RS3 that yields horsepower and torque gains over the well-designed factory airbox, ultimately resulting in this beautifully-manufactured Carbon Fiber Open-Top Cold Air Intake System.

NOTE: For 2019+ models, you must also purchase this adapter kit: 034-108-Z074