Dyno Spectrum DS1

Ultra-fast vehicle reprogramming

Users browser over WiFi

Works with multiple devices

High-speed data logging

Realtime tuning

E85 flex-fuel

**FREE OVERNIGHT SHIPPING WHEN YOU SELECT "LOCAL PICK UP" AT CHECK OUT**

Free Overnight Shipping within the US on DS1 unit alone. 

***If for some reason it charges you shipping, we will refund the shipping charge***

***Note Free Overnight is for Retail Clients Only, not Wholesale Dealers*** 

If you are looking for the DS1/TCU 4.0T combo click here:

https://sillyrabbitmotorsport.com/ds1-srm-tcu-tune-combo.html

Plug and Play 4.5 Bar MAP and Boost Pressure Sensor Kit for the Audi 4.0 TFSI engine

Plug and play MAC Valve kit for Audi 4.0TFSI

Flex Fuel Sensor Kit for 4.0TFSI - Designed to work with the DS1 tuning suite from Dyno Spectrum.

4.0TFSI Fuel Line Re-Route kit for engine bay fuel supply. Necessary for e85 ethanol flex fuel applications and all bigger than stock turbos.  This line kit is Alcohol safe!  

This kit is necessary when installing a DS1 (dynospectrum) flex fuel tuning suite.

Performance TCU tune for the DL501 Dual Clutch Transmission. Bring your dual clutch transmission to life like never before. This server based flash platform allows you to flash your TCU any time via your cars OBD2 port and a PC -  featuring an array of options that will bring the most out of your vehicle.

The tuning is provided by our 10 year industry partner http://www.etspec.com

Remote Tuning for Porsche Vehicles supported by the Cobb Accessport

Save money while maximizing performance with this package deal

Free overnight shipping within the Continental US!

**FREE OVERNIGHT SHIPPING WHEN YOU SELECT "LOCAL PICK UP" AT CHECK OUT**

***If for some reason it charges you shipping, we will refund the shipping cost***

Flex Fuel Sensor Kit for 2.5TFSI - Designed to work with the DS1 tuning suite from Dyno Spectrum.

By simply pluging in the PnP kit, a whole new level of control is available allowing some of the following features:

• Direction Injection and Port Injection Support – 12 injector Option
• PDK Supported
• VTG Supported
• Up to 12 Maps to switch between
• Adjustable Traction control
• Adjustable Launch Control
• Adjustable Knock control
• Adjustable Direct Injection Pump control
• Rolling Antilag
• Pit Lane limiter
• Clutch Pressure adjustment and Fast Logging
• DTC Clearing from Onboard
• Live Tuning of every aspect of the engine’s calibration
• Ability to select desired engine map, boost level, traction and launch control levels through 12 Position switch or via OEM Steering wheel control
• Fully adjustable Launch control with Anti-lag strategies and Ramp in Maps
• Full Variable Valve Timing control
• Closed loop Lambda Control using OEM lambda
• Flex Fuel control
• Flat Foot Shiftings
• Fully adjustable closed loop boost control with launch level adjustments and trims for turbo speed, air charge, engine coolant temp, exhaust gas temperatures etc
• Monitor and trimming of exhaust gas temperatures
• Built in data logging using a market leading analysis software of up to 8 hours, with data rates at up to 1000hz
• Rolling Antilag / Pit lane limiter strategies, great for building boost on a roll
• Antitheft and valet modes
• Super fast connection via RJ45 Ethernet port for live tuning anywhere in the world or evenremotely if on track if connected to a wireless unit.
• Adjustable traction control strategies based on lateral g, steering angle and/or individual wheel speed monitoring.
• 4 programmable and selectable target slip maps. An immediate torque reduction can be applied by the ECU via ignition retard or a fuel cut.
• Configurable Engine Safety Trips on all important parameters like oil temperature, oil pressure.
• Fuel pump control of both main, and sub pumps, as well as Relative fuel pressure monitoring and limiting in the event of fuel pressure dropping on boost.
• 4 different Pedal to Throttle Angle maps with multipliers for different parameters e.g. speed. Again adjustable via steering wheel buttons
• Configurable individual cylinder closed loop knock control, to suit any cylinder modification with adjustments to frequency, windows for listening and gains for each cylinder. Ability to trigger full cylinder shutdown in severe knock conditions.
• Ability to change Torque ramp in after launch
• Run up to 7bar map sensors
• Change injector dead times based on voltage levels for proper control
• Change injector end angle to ensure injection point is properly calibrated
• Ability to fit any type of external sensor to monitor and trigger safety trips from anything from crank case pressure to damper position
• Ability to use any size DBW throttle body e.g. Chevrolet LS7
• Wet and Dry – Wet and Dry nitrous control with ability to drive solenoids directly and control n20 heaters via pressure monitoring
• Ability to control any external vehicle features based on sensor inputs e.g. Adjustable rear wing linked to G force or exhaust control valves
• Connect any race series dash or even one of our partners’ Touchscreen CANBUS adjustment /display units
• View any input live with built in scope up to 1000hz
• And much, much more!

Note: Can't be combined with other coupon codes

Tial Wastegate MVI Actuators specifically for the Audi 4.0TFSI engine.

Includes Direct Fit Brackets, Wastegate actuators, MAC Valve Boost Control Solenoid, Vacuum Hose, and Tee Fitting.

& 

Ready to run higher than 30psi of boost on your Audi 4.0TFSI Engine? We've got you covered. This simple plug and play kit includes everything you need to upgrade your pressure sensors to 4 Bar Absolute (~43.5psi of boost)

Includes:

(1) Manifold Air Pressure and (2) Boost Pressure Sensors

Custom DME/ECU tuning is required for this product.

Complete 4.0T air to air intercooler solution.  Optional port fuel injection solution integrated to the kit with 4 x 1300cc injectors, silly rabbit tuning port fuel injector controller, wiring harness and lines.  Port fuel uncorks the power limitations of the OEM fuel system permitting 1000+ whp on ethanol, race gas etc.

Video Installation guide https://www.youtube.com/watch?v=ppaH64K0UcE

Note: Installing this unit will lose night vision option on C7 cars but not the S8 models.